Skip to content
Architectural shingles installed by a careful crew (470) 762-1508
Duluth Roofing Experts logo

Seamless gutters

Gutters and Downspouts in Duluth

Seamless gutters and downspouts sized for your roof and pitched correctly, so rain goes where it should.

Rain streaming over the lip of an overflowing gutter

Where the Roof's Water Ends Up

A roof sheds a remarkable amount of water in a summer downpour, and every drop of it ends up at the gutters. When gutters are undersized, sagging, pulled loose or clogged, that water spills over the edge, soaks the ground beside the foundation, splashes up onto walls and rots the boards behind the gutter. Seamless gutters reduce leaks because there are no joints along the run, only at the corners and downspouts. We measure the roof area that drains to each gutter and size the gutters and downspouts to match, then set the pitch so water flows steadily toward the outlets instead of pooling. Hangers are spaced closely enough to hold the weight of wet leaves and heavy rain. Downspouts are placed where they will carry water away from walkways and the foundation. Many homeowners have new gutters installed right after a new roof, which makes sense: the drip edge is fresh, the roof line is open and the whole system can be planned together. Either way, the crew works carefully on ladders, protects the plantings below and leaves the yard clean.

What Gutter Work Includes

Gutters planned as part of the roof, not an afterthought.

  • Sizing

    Gutters and downspouts sized to the roof area that drains into them.

  • Seamless runs

    Gutters formed in one piece per run to cut down on leaking joints.

  • Correct pitch

    A steady slope toward each outlet so water does not sit and pool.

  • Strong hangers

    Hangers spaced to carry the weight of wet leaves and heavy rain.

  • Downspout placement

    Outlets placed to send water away from walkways and the foundation.

  • Roof edge tie-in

    Gutters set to work with the drip edge so water lands inside them.

  • Old gutter removal

    Worn gutters taken down and hauled away with the rest of the debris.

Three Visits Become One Finished Gutter Line

  1. Survey the roof edge

    We check the current gutters and roof edge, measure the runs and note problem spots.

  2. Quote and color

    You get an itemized quote, pick a color and confirm an install date.

  3. Install and test

    New gutters go up, downspouts are connected, and we check the flow with you before we leave.

Gutters Planned With the Roof Line

  • Planned with the roof

    Gutters and roof edge are designed together, so water flows into the gutter instead of behind it.

  • Ladder safety

    Ladders set on stable footing and the area below kept clear while we work.

  • Checked before we go

    We run water through the system and walk the downspouts with you.

  • Sized to your roof
  • Seamless runs
  • Proper pitch
  • Flow checked at the end

Water Spilling Over the Edge?

Call and we will look at your gutters, the roof edge and the downspouts, and give you a clear written quote.